Rubber Fender Airbags for Terminals Ship Landing

Well-run gear, qualified revenue workforce, and superior after-sales companies; We’ve been also a unified huge loved ones, anyone persist with the organization benefit “unification, determination, tolerance” for Rubber Fender Airbags for Terminals Ship Landing, Welcome your enquiry, very best company will be provided with full heart.
Well-run gear, qualified revenue workforce, and superior after-sales companies; We’ve been also a unified huge loved ones, anyone persist with the organization benefit “unification, determination, tolerance” for China Rubber Fender, Ship Fender, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we offer, effective and satisfying consultation service is supplied by our specialist after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So please make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We are confident that we are going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We’re searching forward for your inquiries.
Pneumatic Rubber Fendera

This is a high strength, and high anti-corrosion fender system. The rubber fender has the chain net type, rope net type and

Pneumatic fender-sling type

Pneumatic Rubber Fender that are supplied without a factory fitted nets are referred to as a sling type. This fender has modified end fittings allowing the fender to be lifted and installed efficiently.

Chain net type

Rope net type

Pneumatic fender-net type
The fender body made by a chain net or rope net etc. Chain nets are able to withstand corrosion longer and are usually built with used tyres and rubber sleeves to provide additional protection. Fiber nets use only rubber sleeves. Wire nets are light and more easily repaired.

The most highlight characteristic of the pneumatic rubber fender is:
The fender is covered by a tire chain net, and this prolong the use life of this inflatable fender.
We use the used tyre for the net of our fenders, all the tire will be done the fresh treatment, the surface is beautiful.   Our chain has the characteristic of anti-UV and anti-sea corrosion. All the chain are zinc galvanized treatment. We also have an PP high density rope to replace Chain, this rope is also anti-uv, anti-sea water, anti-abrasion and anti corrosion. The diameter from 0.2m to 5m, and the length is from 0.5m to 12m.

The most highlight characteristic of the pneumatic fender is:
The fender pneumatic equipped with a tire chain net, and this prolong the use life of this inflatable fender.

We use the used tyre for the net of our fenders, all the tire will be done the fresh treatment, the surface is beautiful.   Our chain has the characteristic of anti-UV and anti-sea corrosion. All the chain are zinc galvanized treatment. We also have an PP high density rope to replace Chain, this rope is also anti-uv, anti-sea water, anti-abrasion and anti corrosion.

 The pneumatic fenders are also called inflatable fenders, has the following characteristics:

1. High energy absorption
The energy absorption is the main technical data of the pneumatic rubber fender. As the tonnage of the ship increases, the impact energy of the ship contacting the shore or other vessels increases exponentially during berthing operations. The huge impact energy must be absorbed by the full deformation of the fender and sufficient contact area. Our pneumatic fender compression deformation could be more than 60%, and the contact surface area expanding by the compression deformation increasing. This fenders’ energy absorption ability is much more than other type fenders.

2. Super low reaction force
We fill the low pressure air inside the inflatable fenders, so the inner pressure is increased limited during the compression deformation.
Due to the large contact surface, so the pressure to the ship unit area is low. Compared with other ship fenders, this is not only a low reaction force, it is a super low reaction force.

3. The inclined contact is good during the operation
For ships, there must be a certain angle of access to the shore and the possibility of connecting the ship. Our inflatable pneumatic fenders are much more adaptable to inclined contacts than other fenders.

4. The rubber pneumatic fender will be floating on the water, even the ship swings, it can be applied.
Yutung inflatable fenders float on the surface of the water ( over 50% of the body area). And by the tiding, the fender position will not change with respect to the ship’s position. In particular, when the ship sways with the waves, the cylindrical inflatable fenders roll with little friction. Therefore, it will not damage the shipping coating, and also can ease the swinging and vibrating of ship.
This rubber inflatable fenders have been widely used in oil tankers, container ships, yachts, offshore platforms, large docks, military port terminals, large bridge piers, etc.

Performance of Pneumatic Rubber Fender

Yokohama Pneumatic Fender-Baby size

Compared with the traditional elastic rubber fender, our inflatable rubber fender has the following advantages:
1. The energy absorption is large, and the reaction force on the ship is small.
2. Easy for installation
3. Good elasticity, will not deform under the compression
4. Light and economy

Flange end style and the fender accessories, please check the under below picture link:

How to fill the air for pneumatic rubber fender:

Marine pneumatic fender performace test:

Pnuematic fenders under production:

Attn.Pls We are supplier of Natural Rubber Mat with Tyre Fabrics Raw-Materials for making Airbags. :

Fenders pneumatic application

1.What’s the material of your airbags and pneumatic rubber fender ?
Material: natural rubber +Synthetic-tyre-cord layer for reinforcement

2.”What’s the advantage of your products ?”
Pneumatic rubber fender manufactured by mold ,It is the sole factory in China that produces mold . Different with hand make products , difference like Vacuum tyre and tube tyre .

3.How long about the shortest delivery time ?
We have stock sizes fenders in China. We can delivery from the nearest warehouse to you .

4.What’s your MOQ of rubber airbagsand fenders ?
MOQ: 1PC yokohama fender price

5.What’s the lifespan of your rubber airbags and pneumatic rubber fender ?”
Airbags Life span: 6-10 years. Pneumatic rubber fender lifespan more than 10 years .

6.What’s the warranty period of your rubber airbags?”
12months. Product will be maintained or returned because of the airbag leakage ,take off layers,the head of airbag break off etc , products caused by product quality The repair technology supply for free .

7 .What’s your standard of you products ?
Airbags manufacture standard stickly with ISO14409
Pneumatic rubber fender to be satisfy with ISO17357: 2014

8.What kind of certificate can you provide ?”
DNV.GL ,BV CCS LR .certificates are available.